توضیحات تکمیلی
| Manufacturer | Sartorius |
|---|---|
| Item no | 5445307H7–SS–A |
| Category | انواع فیلتر HPLC |
فیلتر 5445307H7–SS–A شرکت Sartorius
فیلتر 5445307H7–SS–A شرکت سارتوریوس Sartorius سری Sartopore 2 MidiCaps از جنس پروپیلن ، انداز منفذ ۲ دهم میکرومتر ، مناسب برای خط تولید فرآورده های تزریقی .
مشخصات کامل فیلتر 5445307H7–SS–A شرکت Sartorius در جدول زیر قابل مشاهده می باشد .
فیلتر های سری Sartopore 2 Midicaps شرکت Sartorius :
فیلتر های سری Sartopore 2 Midicaps شرکت Sartorius استاندارد صنعت فیلترهای مایع پلی اترسولفون (PES) با کارایی بالا است. طیف گسترده ای از ترکیبات مختلف ، اندازه منافذ ، عملکرد فیلتراسیون بسیار اقتصادی و ایمن را تضمین می کند.
5445307H7–SS–A Sartorius Sartopore 2 MidiCap
Sartorius Sartopore 2 is the industry standard of high-performance polyethersulfone (PES) liquid filters. A broad variety of different pore size combinations ensures highly economic and safe filtration performance. From single-layer high flow solutions to specific Mycoplasma retentive filters, Sartopore®2 perfectly adapts to your specific process needs.
Sartorius Sartopore 2 MidiCaps :
Sartorius Sartopore 2 is the industry standard of high-performance polyethersulfone (PES) liquid filters. A broad variety of different pore size combinations ensures highly economic and safe filtration performance. From single-layer high flow solutions to specific Mycoplasma retentive filters, Sartopore®2 perfectly adapts to your specific process needs.
Sartorius Sartopor 2 HF Pore size: 0.2 µm (single layer)
It is the identical final 0.2 µm membrane layer which ensures sterility of your product. But it is the pre-filter porosity which makes the difference. Depending on specific product properties a finer or coarser pre-filter layer can significantly improve the capacity of the filter. Quasi particle-free liquids like buffer solutions can be filtered without any pre-filter layer for increasing the flow performance.5445307H7–SS–A
If a new process is designed or existing processes are optimized, Sartopore® 2 allows cost reduction of up to 90%. The best-performer of your specific application can be easily identified by Increase® filterability trials. Make use of this service to understand the benefit for your filtration process.5445307H7–SS–A
-Lowest filtration costs (highest filter capacity)
-Various filter solutions within one platform (identical materials used for your process)
محصولات مشابه : 5445307H7–FF–A ، 5445307H0–SS–V ، 5445307H9–SS–A
5445307H7–SS–A Sartorius Specifications | |
| Application | High capacity platform for conventional sterile filtration |
| Industry | Pharmaceutical industry |
| Connector Inlet | 1½” Tri-Clamp 50 mm |
| Connector Outlet | 1½” Tri-Clamp 50 mm |
Filter Size | size 7 (0.05 m² / 0.54 ft²) |
| Filtration Area | 0.05 m² |
| O-ring | materials seal | Silicone (SI) |
| External diameter | 108.5 mm (77 mm without Connection / Valves) |
| Maximum Diffusion | at 20 °C and 2.5 bar | 36 psi: 0.05 m² | 0.5 ft²: 4 mL/min; 0.1 m² | 1 ft²: 5 mL/min; 0.2 m²| 2 ft²: 7 mL/min; 0.45 m² | 4.5 ft²: 14 mL/min |
| Capsule/Cartridge Format | MidiCaps |
| Maximum operating pressure | 5 bar (72.5 psi) |
| Pore Size Pre-Filter | 0.45 µm |
| bacterial retention | Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 by ASTM methodology |
| No Fiber Release | product complies with article 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72. |
| Sterilization Method | Autoclavable |
| support fleece | Polypropylene (PP) |
| Pack Size | 4 |
| Vent Valve | Standard |
filtration area | 0.05 m² |
